The application of material to the battery pack
The fixation between 1. soft core and aluminum shell
Recommended use: Safid two component polyurethane thermal conductive bonding adhesive, thermal conductivity: 0.7W/m.k, bonding strength: 7Kpa;
Safid high hardness heat conduction double-sided tape, thermal conductivity: 0.8~1.0W/m.k, double sided has strong adhesive force.
2. soft core and soft core buffer
Recommended use: Safid foam, in the case of 80% compression, you can achieve a rebound of less than 400Kpa, with good cushioning and protection.
Sealing and waterproof of 3. cases
Recommended use: Safid single component high tensile strength RTV silicone rubber, tensile strength: 650%, can achieve IP67 waterproof grade;
Safid foam silica gel, can be made according to the customer box to become the corresponding size, can be repeated disassembly, with compressible ratio and resilience, can reach the IP67 waterproof grade.
Heat dissipation of 4. box, cold water plate and battery module
Recommended use: Safid high resistance tearing type heat conduction gasket, tensile strength 180%, without any glass fiber and silica gel cloth, relative to the market with glass fiber and silica gel cloth products, this style has low thermal resistance, relatively low cost, high resistance to tear and so on, and has good cushioning performance.
Two, material application of square battery pack
Sealing and waterproof of 1. cases
Recommended use: Safid single component high tensile strength RTV silicone rubber, tensile strength: 650%, easy to repair, easy to remove, can achieve IP67 waterproof grade;
Safid foam silica gel, can be made according to the customer box to become the corresponding size, can be repeated disassembly, with compressible ratio and resilience, can reach the IP67 waterproof grade.
Heat dissipation of 2. box, cold water plate and battery module
Recommended use: Safid high resistance tearing type heat conduction gasket, tensile strength 180%, without any glass fiber and silica gel cloth, relative to the market with glass fiber and silica gel cloth products, this style has low thermal resistance, relatively low cost, high resistance to tear and so on, and has good cushioning performance.
Three, material application of cylindrical battery pack
1. bonding between the core and the base
Recommended use: Safid acrylic structural adhesive with strong bonding strength and good fixation.
Heat dissipation of 2. electric core
It is recommended to use: Safid low gravity double component heat conduction sealing adhesive, thermal conductivity: 0.6~1.0W/m.k, the proportion of 1.32 g/cm3, which can effectively improve the energy density ratio of the power battery.
Heat dissipation of 3. box, cold water plate and battery module
Recommended use: Safid high resistance tearing type heat conduction gasket, tensile strength 180%, without any glass fiber and silica gel cloth, relative to the market with glass fiber and silica gel cloth products, this style has low thermal resistance, relatively low cost, high resistance to tear and so on, and has good cushioning performance.